Cambridge Plumbing Expert’s Guide on Toilet Seat Bumpers Care

cambridge professional plumber

You surely have read my blog posts about water-saving tips, toilet care, water heater care and all the other plumbing topics I have talked about. But I just realized that I left out one unnoticed and often disregarded part of the toilet — the toilet seat bumpers. These are little plastic pieces under the toilet seat that are responsible for keeping less than an inch of distance between the seat and toilet bowl itself. It may not be as important to you as the other parts of your toilet but it is surely valuable just the same. It allows you to clean your toilet seat and also prevents damage to the bowl. So if your toilet bumpers aren’t there anymore, then it’s time to get some replacement. Here’s a quick guide to help you:

How to Install Toilet Seat Bumpers

Dampen a rag under warm water. Lift up the toilet seat. Scrub around the bumpers to clean the area. Slide the flathead screwdriver underneath the old bumper. Push against it until it pops out. If the bumper was screwed in, slide the flathead underneath the small circular cover in the center of the bumper and pop it out. Unscrew the attached screw, if used on your bumper. Set it aside. Repeat this on the other bumper. Remove both bumpers and discard them.

Now that you know how to install new toilet seat bumpers, it’s time to recall proper toilet cleaning. Remember, care and maintenance are important in keeping whatever fixture and appliance we have at home in tip-top shape. Just remember to do the cleaning carefully to prevent damaging the parts. With this being said, let me share with you a detailed step-by-step guide on proper toilet care:

How to Clean a Toilet

Cleaning a toilet is a task that often gets postponed, but it’s essential to keep toilets clean. A dirty toilet will look bad, smell bad and breed germs. However, as with many of life’s less pleasant tasks, cleaning your toilet now can save you headaches later. With these instructions, you’ll get through this task quickly and efficiently.

Remove items from atop and around the toilet. Before you begin, clear the toilet of things that may obstruct you while cleaning – tissue boxes, photos, etc.. Because you want to give the toilet a thorough cleaning, you’ll need to be able to reach every nook and cranny.

Just follow the Cambridge plumbing expert’s guide on toilet seat bumpers care and you’ll surely lengthen the life of your toilet.

 

Who to Call for Toilet Installation in Boston

licensed plumber BostonSome things are just not meant to last forever. And that includes your toilet. Your toilet may have been with you for years, and now it has broken down. Or maybe you just want to replace it with a newer, more fashionable one. Hey, fashionable toilets nowadays. Do you know how to replace your toilet? I think not! You may think that you can but only do so if you are a legit plumber. But if not, please don’t rely on what the internet says. If you are unsure, just don’t do it.

To lessen your stress, toilet installation expert in Boston is just a phone call away. See? If you tried to do it yourself, you might have done an OK job, but it can also be possible that you might cost yourself a few extra hundred dollars for doing the wrong thing. Now, we wouldn’t want that, would we? An expert is who you should trust. How would you now if the plumber you are going to get is not a shady one? Ask your neighbors and friends. Ask them who they trust, and the company of the plumbers that they rely on.

The local plumbing experts of Boston are all licensed. They have been in the industry for years. The experience that they have can say that they are really worth it, and how they perform their jobs are concrete proofs. Don’t hesitate to invest in your plumbing. You’ll know they are worth it when you are not calling these plumbers every week for your plumbing problem.

How To Fix A Running Toilet In Your South FL Home

how-to-fix-a-running-toilet-in-your-South-FL-homeIn my previous post, I’ve talked about the top three causes of a running toilet.  As promised, here’s part two of the blog: the solution, yay!!

I did some research for the best solutions of the problems I posted earlier.  Some are not easy and trust me, I tried!  It’s quite hard to figure out what goes where and so on. However, without further ado,  here they are:

Fixing the Three Common Problems to Your Running Toilet

Your Stuck Flapper

In order to fix this toilet malfunction, simply grab the flapper and securely close it in your hand.  Carry out any required adjustments and it should respond well to this approach.

The Intermittent Filling

The solution for intermittent filling differs based on its root cause; however, the most general method of correcting this is by removing the buildup of mineral and cleaning the tank.  You can also simply replace the flapper to directly fix the problem.

Your Dysfunctional Flapper

Close the valve of the toilet which is frequently located underneath the toilet tank.  Flush the toilet to verify that it is closed.  If the tank refuses to fill up, then this proves that the valve has been successfully closed.

Remove the flapper and the chain and replace it with a new one. Use a finger to remove any mineral you find around the rim of the flapper. Remember to make use of a sponge while replacing the flapper.

However..

If you are still encountering problems and if you couldn’t really fix it, call your local South FL plumber today.   The entire mechanism may be faulty and it’s something you should not attempt to be doing yourself.  You might have to buy a complete new set for your toilet.  Visit OrrPlumbing.com to get in touch with a pro to help with the installation and the leaks.

Find out how a toilet works! Watch this video from Ehow.

Top 3 Causes of Running Toilet Problems

running-toiletOkay… there’s water running but it’s not coming from the faucet. You listen closely and it’s coming from — the toilet??!! Can you imagine how much money and H20 is wasted if this problem continues?

Not everyone knows how to resolve running toilet problems, (just LIKE ME) so hiring the services of a local plumber is the fastest and best method of solving the problem.

Some people opt to troubleshoot common plumbing issues by themselves (yaay for them!).  A number of toilet dilemmas can be fixed easily by carrying out some minor tweaks and adjustments and it’s just a matter of knowing what to do and how to do it.  But before doing so, it is best to figure out the cause of all these before carrying on any solution.

Causes Of A Running Toilet

  1. Stuck Flapper

If a toilet tank does not fill to capacity or does not fill up at all, then this could be an indication of a malfunctioning flapper.  A stuck flapper can be a result of many factors which include:

  • The chain not properly catching
  • The wedge of the flapper not properly opening
  • The flapper not aligned properly
  • The flapper is stuck
  1. Intermittent Filling

If the toilet tank is not performing its duties of tank filling, then there may be a slow leak.  In order to confirm this, place a few tablets of food dye in the tank. Do not flush the toilet for at least an hour; if the colored dye shows up in the bowl after the hour has past, this confirms the problem.

  1. A Dysfunctional Flapper

A flapper that is dysfunctional can result in multiple running toilet issues. Hiring the services of a plumber to repair this, particularly when it requires replacement, can frequently cost a lot.

So, have you determined what caused YOUR toilet problem?  I will be posted a part 2 of this blog post shortly, talking about quick solutions to the top 3 causes I wrote above. Stay tuned!

Is your toilet consistently leaking? Watch this video to find out what you should do!